You have probably landed on this page because you are also facing a similar situation like others. Well, Brother Printer in error state is yet another problem faced by Brother Printer users. The reasons why you are getting this error might vary in different situations but following some troubleshooting methods might help you in getting past the problem.
The reasons why you are getting this error might vary in different situations but following some troubleshooting methods might help you in getting past the problem. So, next up we shall learn the probable causes behind this error which shall be followed by tested troubleshooting methods.
If the printer is still in error state, then get help from Brother Support or try reinstalling Brother Printer drivers on your device.
It is a problem that appears on a printer while you try to print from it. If your printer is in an error state, then you won’t be able to take printouts from it. Make sure your printer is properly connected and the latest brother printer driver is installed on it.
A faulty connection, low ink, jammed paper, or an outdated brother printer driver can be the reason why your brother printer is in an error state. To get rid of this problem make sure that your printer is getting proper power supply and internet connectivity.
Sometimes restarting both the printer as well as the computer may help you in getting your brother printer out of error state. Also, try to update the brother printer driver.
The printer itself is the cause behind this problem. Sometimes, it might be undergoing technical issues or there is a problem related to the hardware. Clearing the paper jam or fixing the connection issue may help you in this situation.
First, click on the Start button and go to the Devices and Printers section. Now, locate the name of your printer and right-click on it. Next, select “see what’s printing” and then remove the checkmark present next to “use printer offline”.
To get your brother printer out of sleep mode, press the Start and Options keys at the same time. Now using the up or down arrow key choose the Off button present next to Sleep Mode. Select Ok and Exit to complete the process.
A loose cable connection can be the major cause of why it is saying “not connected”. Other than this, a damaged USB cable or faulty printer driver may also be the reason behind the connection issues.
A faulty connection or a damaged USB are the major causes of the printer going in an error state. This problem usually occurs when you try to print from the printer that is having a hardware issue.
We are not a BROTHER. At this platform, you will only find informative articles that have been shared for the purpose of training and knowledge. We have no affiliation with Brother and hence we completely disclaim the ownership of its brand names, logos, facts, or images. These have been used here just for referential purposes.