Despite being one of the most popular printer brands, you may face problems while printing your documents using Brother’s printers. There are many types of issues that make you unable to use your Brother printer. When you try to print your document, you may get an error message indicating, “Brother Printer Won’t Turn On”. This leaves you completely unable to print your documents or use any functionalities of your printer. Here, in this article, we have mentioned in detail how to fix Brother printer not working after the power outage issue.
Why won’t my brother printer turn on?
There are many reasons due to which your Brother printer might not work properly even after giving a proper print command. Some of the most obvious reasons why your Brother Printer won’t print are given below:
Defected power cords
Problem with the power source
Issues with the printer driver
How to Fix Brother Printer won’t Turn On Issues?
Once you come to know why your brother printer is not responding properly, you need to apply some troubleshooting methods to fix the problem. There are several methods by which you can easily print your documents using the printer. Some of them are given below:
Method 1: Disconnect and Connect the Power Cable
Before applying any technical method to Fix Brother Printer in Sleep Mode, you must disconnect and connect the power cable from the printer. Sometimes, your printer might not respond properly because of the loose connections or any error appearing on your device. So, it is important to make sure that there is a proper connection between the printer as well as your system. If there is any problem, then reconnect them. For this:
First of all, disconnect the cable from the Brother printer and the power source.
Wait for a few seconds and leave the connection idle.
After that, reconnect the printer power cable to the power socket and then press the Power button on the Brother printer to check if it is working properly or not.
Method 2: Check the Power Cable and Printer’s Power Button
Sometimes Brother printer not working after power outage issue can also occur if the power cable is damaged. Therefore, you must check if there is any problem with the power cable. If any issue is encountered, unplug the power cable from the power outlet and check for any damage. If there is any damage, then replace it with a new cable as soon as possible.
In case, if there is no problem with the power cable, you need to check if the Power button is damaged or not. If yes, then try to repair it at the earliest.
Method 3: Clean the Printer
Sometimes if your brother printer shutting down standing by on/off to resume, you need to check if there is any short circuit or your cartridge is leaking. Thus, it recommended to clean your printer smoothly with a soft cloth. After doing this, check if the problem has been fixed or not.
Method 4: Check the Cartridge & Print Head
Remove the Printhead and inspect it as there might be some problem with the printhead that makes your printer unable to turn on. If there is not enough ink in the cartridge and you are still printing documents, then the printer might overheat and the print nozzles might get permanently damaged.
So, smoothly remove the print head and disconnect the power for at least an hour. After that, switch on the printer without inserting the print head. Once you are done, check if the issue has been fixed or not.
Glen B Hunt is a self-professed Brother printer support expert; he has been making people aware of the brother printer in error state. His passion is to write about brother printers. He writes for Brother printers products